AMB369

Multifunctional tracker with peripheral device support

Feature

GPS+GSM positioning

High accuracy GPS positioning with U-Blox chipset

RS232

Supports peripheral accessories including fuel level sensors, RFID readers, cameras and more.

Two-way communication

Mic and speaker accessories for two-way communication

Multiple alerts & reports

Fuel cut-off, geo-fence entrance and exit alerts, route deviation, mileage reports, etc.

1-Wire®

Interface for temperature sensors and i-Button driver ID

FOTA

Firmware upgrade using GPRS network

Remote engine shutdown

Shutdown engine remotely from the app or web portal

Built-in battery

Low power consumption and long standby with internal 600mAh battery

Specification

GSM Specifications
Communication system GSM
GSM module SIMCOM800
GSM frequency GSM 850/900/1800/1900MHz
GPS module U-blox7Q
Location accuracy <10 meters
Tracking sensitivity -161dBm
TTFF (open sky) Avg. hot start ≤1sec
Avg. cold start ≤35sec
Switch 1 SOS Button, 1 power switch
LED indicator 3 LED lights indicating GPS/GSM/External power status
Input voltage DC 11~36V/1.5A
Flash memory 8MB ( GPRS data 20400 units, SMS data 700 units)
I/O Port 4 Digital inputs - 1 negative input, 1 positive input, 2 custom input (Default 1 positive input, 1 negative input )
2 Analog input
AD1: 0~6V
AD2: 0~12V
2 Output
1 RS232 port (camera/RFID reader/ two-way calling)
1-Wire protocol (Temperature sensor/i-Button)
1 Impulse detection (Default speedometer detection)
1 USB port 
Sensor 3D accelerator sensor
Operating temperature -20~+70
Device weight 160g
Device dimensions 90×60×27mm
Humidity 5%~95%
Battery 600mAh/3.7V
Internal Battery Life 15 hours in sleep mode, and 6 hours in normal working mode
Power consumption 30-35mA standby current

Downloads

Leaflet Downloads

Schedule an appointment for complete peace of mind.‚Äč

Schedule an appointment